XP95 Addressable Cat O Base Visual Alarm Device

XP95 Base Sounder VAD Cat O

The XP95 Base Visual Alarm Device (VAD) incorporates a loop-powered visual alarm device with a standard intelligent mounting base and is used to signal a fire alarm in enclosed areas.

The visual alarm device self-test is achieved by means of an LED monitoring circuit. If the LEDs do not draw current when the VAD Base has been switched on a fault signal is transmitted when the device is next polled.

Group addressing is a simple method of alerting an entire area or group of rooms without delay. For systems requiring isolators at every point the built-in isolator saves installation time and cost.

The XP95 Base Visual Alarm Device can be used either with a detector fitted or with a cap for operation as a stand-alone alarm device and is moulded in polycarbonate with stainless steel contacts that accept solid or stranded cables of up to 2.5mm².

  • Automatic LED check when VAD activated
  • VAD flash rate of 0.5Hz
  • Synchronised flash
  • Individual & group addressing
  • Built in short circuit isolator

Approvals: AS ISO 7240.23:2014







    Coverage Class O
    Flash Colour White
    Frequency Flash Rate 0.5Hz
    Operating Voltage 17 to 28 V DC
    Quiescent Current  300µA
    Current Operated 9mA
    Operating Temperature -20° to +60°C
    Humidity  0 to 95% (no condensation)
    IP Rating 21C
    Dimensions 115mm x 30.5mm
    Weight 156 grams
    4107-2007 XP95 Base VAD Cat O
    201-0114 XP95 White Base Cap
    201-0119 XP95 Red Base Cap