The XP95 Base Sounder Beacon is a loop-powered sounder device with an integral detector mounting base and incorporates a supplementary visual indicator device VID. The device has been designed to signal a fire alarm in enclosed areas where the sounder is required as the primary method of notification and where supplementary visual indication would also be a benefit.
Alert and Evacuation tones complying with the recommendations of AS7240-3 are incorporated which are fully programmable for staged evacuation control within the LoopSense and FireFinder control panels. the device does not comply with AS7240-23.
The low volume range is useful in areas such as hospitals where a fire alert is initially intended to warn staff only. The sounder is set to the high range for general use.
Synchronisation of tones ensures the integrity of the alarm signal/tones from different sounders do not merge into one signal that could be mistaken for a different tone.
For systems requiring isolators at every point the built-in isolator saves installation time and cost.
The built in acoustic self-test enables the sounder to listen to itself when it is switched on and if no sound is detected, a fault signal will be transmitted when the sounder is polled to the control panel.
The beacon self- test is achieved by means of an LED monitoring circuit. If the LEDs do not draw current when the sounder beacon base has been switched on a fault signal is transmitted when the device is next polled.
The Sounder Beacon Base can be used either with a detector fitted or with a cap for operation as a stand-alone alarm device.
- Two volume settings
- Alert and Evacuate tones
- Synchronisation of tones
- Synchronisation of beacon flash
- Individual and group addressing
- Built-in short circuit isolator
- Unique acoustic self-test
- Unique beacon self-test
Approvals: AS ISO 7240.3:2014
The XP95 Base Sounder Beacon is a loop-powered sounder device with an integral detector mounting base and incorporates a supplementary visual indicator device VID. The device has been designed to signal a fire alarm in enclosed areas where the sounder is required as the primary method of notification and where supplementary visual indication would also be a benefit.
Alert and Evacuation tones complying with the recommendations of AS7240-3 are incorporated which are fully programmable for staged evacuation control within the LoopSense and FireFinder control panels. the device does not comply with AS7240-23.
The low volume range is useful in areas such as hospitals where a fire alert is initially intended to warn staff only. The sounder is set to the high range for general use.
Synchronisation of tones ensures the integrity of the alarm signal/tones from different sounders do not merge into one signal that could be mistaken for a different tone.
For systems requiring isolators at every point the built-in isolator saves installation time and cost.
The built in acoustic self-test enables the sounder to listen to itself when it is switched on and if no sound is detected, a fault signal will be transmitted when the sounder is polled to the control panel.
The beacon self- test is achieved by means of an LED monitoring circuit. If the LEDs do not draw current when the sounder beacon base has been switched on a fault signal is transmitted when the device is next polled.
The Sounder Beacon Base can be used either with a detector fitted or with a cap for operation as a stand-alone alarm device.
- Two volume settings
- Alert and Evacuate tones
- Synchronisation of tones
- Synchronisation of beacon flash
- Individual and group addressing
- Built-in short circuit isolator
- Unique acoustic self-test
- Unique beacon self-test
Approvals: AS ISO 7240.3:2014
