Marine DIN-Rail Switch Monitor Plus

The Marine DIN-Rail Switch Monitor Plus is designed to monitor the state of one or more single pole, volt free contacts connected on a single pair of cables and to report the status to Apollo compatible analogue control equipment.

The Marine DIN-Rail Switch Monitor-Plus provides four input states to the control equipment: 'normal', 'fault', 'pre-alarm', and 'alarm'. The unit has a red LED to indicate an alarm and a yellow LED to indicate a fault condition.

Certification: MED, ABS & VNIIPO







    Voltage 17 - 28 VDC
    Maximum Current Consumption, at 28 V
    Switch-On Surge, Max 65ms 2.5 mA
    Quiescent 730 µA
    Input Short-Circuit 3.5 mA
    LED Off, Switch Input Closed 1.3 mA
    LED On, Switch Input Closed 3.4 mA
    LED On, Switch Input s/c 5.6 mA
    Switch Input Monitored Voltage 9 - 11 V dc
    Operating Temperature -20°C to +70°C
    Relative Humidity 0 to 95% RH
    IP Rating Designed to IP20
    Size 110mm W x 107mm H x 20mm D
    Weight 95 grams

    Please Note: All data is supplied subject to change without notice. Specifications are typical at 24V, 23°C and 50% RH unless otherwise stated.

    55000-772MAR Marine Switch Montior Plus