FireView provides a unique all-in-one solution for reliable testing of both smoke and heat fire detectors.
To negate the risk of using ladders and scaffolding, the FireView Detector Test Kit has been designed to aid technicians from floor level during the service and maintenance of fire detection systems. FireView can also be used during the system commissioning process to ensure the detection operates to the correct parameters and system design.
FireView contains an affordable and sustainable smoke generation system that eliminates the need for additional spray purchases. FireView offers full prevention to the deterioration of the detector sensitivity while negating residue build-up within the smoke detector. The fan attached to the head of the inspection pole removes any residual smoke remaining inside the detector speeding up the testing process.
The handheld controller incorporates an LED display panel providing alarm activation time, temperature, and battery status.
| FireView Detector Test Kit (4112-1006) | |
| Test Capacity | 200 Heat detectors per charge; 300 Smoke detectors per 10mL fill (approx. 3000 per 100mL bottle) |
| Head Dimensions | 150mm |
| Inspection (length) | 1.2m to 2.3m |
| Weight | Pole: 1.6kg Controller: 0.6kg |
| Charging Time | Full Charge 5 Hours |
| Charger | Input: 100-240Vac, 50-60Hz, 0.5A |
| FireView Portable Detector Test Kit (4112-1012) | |
| Testable Detector | Heat: Rate of Rise Heat Detector, Fixed Temperature Heat Detector Smoke: Ionization Smoke Detector, Photoelectric Smoke Detector Option: Analog Type Detector, Unexploded Type (Heat) |
| Head Size | 150mm (Detector Insertion) |
| Inspection Pole Length | Minimum Approx. 127cm / Maximum approx. 250cm If longer pole is needed 6m and 10m poles are available upon request. |
| Weight | 2.3kg |
| Material | Aluminum |
| Input | AC100 ~ 240V 50~60Hz 2A |
| Output | DC12V 2A |
| Operating Temp Range | Approx. 0°C to 40°C |
| Keeping Temp Range | Approx. -10°C to 40°C |
| Operating Humidity Range | Approx. 0% to 85%, No Frost |
| Smoke Generator Ability | Approx. 50 testable based on 1.00ml smoke detector |
| Battery | 14.8V Li-ION |
| Charging Time | Full charge consumes approx. 5 hours |
| Charger | Input: AC 100-240V, 50-60Hz, 0.5A / Output: DC 12V2A |
| Running Time | Up to 5 hours Duration may vary due to operating conditions; battery has limited recharge cycles and may eventually need to be replaced. |
| Tester Ability (One Time of Charge) | Approximately 200 Heat Detectors and 300 Smoke Detectors |
| 4112-1006 | FireView Detector Test Kit |
| 4112-1012 | FireView Portable Detector Test Kit |
| 4112-1007 | Smoke Oil (100ml) |
| 4112-1008 | FireView 6M Extension Pole |
| 4112-1009 | FireView 10M Extension Pole |
| 4112-1010 | FireView Smoke Detector Removal Tool |
| 4112-1011 | FireView Heat Detector Removal Tool |
| 4112-1013 | FireView Replacement Heat Unit |
