ACP-06 Conventional Manual Call Point

Indoor Manual Call Point Surface Green Surface Mount Door Release Conventional MCP

The Ampac ACP-06 Conventional Manual Call Point is a re-settable manual call point that has been designed to obtain maximum visibility and high reliability in operation.

Six modes of operation are achievable simply by choosing the appropriate internal connection terminals. All configurations are easily accessed via the screw terminals. The internal printed circuit board is fully enclosed for protection and incorporates a current limiter that maintains a steady supply to the LED.

The ACP-06 Manual Call Point is supplied in a choice of either flush or surface mount options. Once fitted the front operating element simply snaps into place and is released using the dedicated test and removal tool supplied with each unit. There is the provision of two cable entry knockouts on the rear plus 2 x 3 pre-marked location points on the top and bottom of the surface mount backbox.

  • Easy and economical installation.
  • Visible in the dark via the unique luminescent re-settable element.
  • Six configurations in one unit design for reduced inventory holding.
  • Extremely easy to reset via the robust twist and set key system.
  • Surface mount and flush mount options are available.
  • High impact resistant ABS plastic material.

Approvals: AS 7240.11:2018

Activfire Logo







    Mounting Surface & Flush Mount
    Maximum Voltage 30 V DC
    Minimum Voltage 4.5 Volt if LED with R1 is chosen
    6.0 Volt if LED with R2 is chosen
    Current Rating (Not-Operated) 0 mA
    Current Rating (operated):
    Resister Values
    R1 470Ω
    R2 680Ω
    18 mA @12 Volt - R1
    13 mA @12 Volt - R2
    45 mA @24 Volt - R1
    31 mA @24 Volt - R2
    Cable Termination 0.5 - 2.5 mm²
    Operating Temperature -30 / +70°C
    Humidity 0 - 95%
    IP Rating 42
    Material ABS / Perspex
    Surface Mount
    4105-1011 Red Surface Mount (Fire Symbol) Conventional MCP
    4105-1012 Yellow Surface Mount Agent Release Conventional MCP
    4105-1013 White Surface Mount Emergency Alarm Conventional MCP
    4105-1014 Green Surface Mount Door Release Conventional MCP
    4105-1015 Blue Surface Mount Conventional MCP
    4105-1018 White Surface Mount Evacuate Alarm Conventional MCP
    Flush Mount
    4105-1021 Red Flush Mount (Fire Symbol) Conventional MCP
    4105-1022 Yellow Flush Mount Agent Release Conventional MCP
    4105-1023 White Flush Mount Emergency Alarm Conventional MCP
    4105-1024 Green Flush Mount Door Release Conventional MCP
    4105-1025 Blue Flush Mount Conventional MCP
    4105-1028 White Flush Mount Evacuate Conventional MCP
    Accessories
    4105-1003 Light Grey Flush Mount Plate with Wall Finishing Bezel
    4105-1004 Hinged Safety Cover - with “ Lift to operate” text
    4105-1005 Hinged Safety Cover - No text
    4105-1006 Test Keys (Pack of 10)