Software Training

Sounder Beacon Base

Sounder Beacon Base

The Sounder Beacon Base is a loop-powered sounder and beacon combined with a standard Intelligent Mounting Base. It is used to signal a fire alarm in enclosed areas. The Sounder Beacon Base can be used either with a detector fitted or with a cap for operation as a stand-alone alarm device.

  • Two volume ranges via DIP switch
  • Beacon flash rate as per AS1670.4
  • Synchronisation of ‘alert’ and ‘evacuate’ tones
  • Synchronisation of beacon flash
  • Individual and group addressing
  • Unique acoustic and beacon self test
  • Enables DDA compliance










    The Sounder Beacon Base is a loop-powered sounder and beacon combined with a standard Intelligent Mounting Base. It is used to signal a fire alarm in enclosed areas. The Sounder Beacon Base can be used either with a detector fitted or with a cap for operation as a stand-alone alarm device.

    • Two volume ranges via DIP switch
    • Beacon flash rate as per AS1670.4
    • Synchronisation of ‘alert’ and ‘evacuate’ tones
    • Synchronisation of beacon flash
    • Individual and group addressing
    • Unique acoustic and beacon self test
    • Enables DDA compliance
    Product Data Sheet
    Installation Guide
    Voltage (Polarity Sensitive) 17 – 28V DC
    Quiescent Current (inc Beacon) 300µA at 24V DC
    Max Current 8mA at 24V DC
    Max Sounder Output 91dB(A)
    Operating Temperature -20°C to +60°C (no icing)
    Relative Humidity 0 to 95% (non condensing)
    IP Rating IP21D (indoor use)
    Size 115mm Dia x 38mm H
    Weight 160 grams
    201-0116 Sounder Beacon Base
    201-0114 White Cap