The Marine DIN-Rail Switch Monitor Plus is designed to monitor the state of one or more single pole, volt free contacts connected on a single pair of cables and to report the status to Apollo compatible analogue control equipment.
The Marine DIN-Rail Switch Monitor-Plus provides four input states to the control equipment: ‘normal’, ‘fault’, ‘pre-alarm’, and ‘alarm’. The unit has a red LED to indicate an alarm and a yellow LED to indicate a fault condition.
Certification: MED, ABS & VNIIPO
The Marine DIN-Rail Switch Monitor Plus is designed to monitor the state of one or more single pole, volt free contacts connected on a single pair of cables and to report the status to Apollo compatible analogue control equipment.
The Marine DIN-Rail Switch Monitor-Plus provides four input states to the control equipment: ‘normal’, ‘fault’, ‘pre-alarm’, and ‘alarm’. The unit has a red LED to indicate an alarm and a yellow LED to indicate a fault condition.
Certification: MED, ABS & VNIIPO
| Voltage | 17 – 28 VDC |
| Maximum Current Consumption, at 28 V | |
| Switch-On Surge, Max 65ms | 2.5 mA |
| Quiescent | 730 µA |
| Input Short-Circuit | 3.5 mA |
| LED Off, Switch Input Closed | 1.3 mA |
| LED On, Switch Input Closed | 3.4 mA |
| LED On, Switch Input s/c | 5.6 mA |
| Switch Input Monitored Voltage | 9 – 11 V dc |
| Operating Temperature | -20°C to +70°C |
| Relative Humidity | 0 to 95% RH |
| IP Rating | Designed to IP20 |
| Size | 110mm W x 107mm H x 20mm D |
| Weight | 95 grams |
Please Note: All data is supplied subject to change without notice. Specifications are typical at 24V, 23°C and 50% RH unless otherwise stated.
| 55000-772MAR | Marine Switch Montior Plus |
