The Integrated Base Sounder comprises a sounder with an integral detector mounting base and has been designed to signal a fire alarm in enclosed areas. The sounder is line-powered requiring no external power supply and is designed for internal use.
Alert and Evacuation sounder tones complying with the recommendations of AS7240-3 are incorporated which are fully programmable for staged evacuation within the LoopSense and FireFinder control panels.
The low volume range is useful in areas such as hospitals where a fire alert is initially intended to warn staff only. The sounder is set to a high volume range for general use.
Synchronisation of tones ensures the integrity of the alarm signal/tones from different sounders do not merge into one signal that could be mistaken for a different tone.
For systems requiring isolators at every point, the built-in isolator saves installation time and cost.
The built-in acoustic self-test enables the sounder to listen to itself when it is switched on and if no sound is detected, a fault signal will be transmitted when the sounder is polled to the control panel. The sounder base can be used either with a detector fitted or with a cap for operation as a stand-alone alarm device.
- Two volume ranges
- Alert and Evacuate tones
- Synchronisation of tones
- Individual and group addressing
- Built-in short circuit isolator
- Unique acoustic self-test
Approvals: AS ISO 7240.3:2014
The Integrated Base Sounder comprises a sounder with an integral detector mounting base and has been designed to signal a fire alarm in enclosed areas. The sounder is line-powered requiring no external power supply and is designed for internal use.
Alert and Evacuation sounder tones complying with the recommendations of AS7240-3 are incorporated which are fully programmable for staged evacuation within the LoopSense and FireFinder control panels.
The low volume range is useful in areas such as hospitals where a fire alert is initially intended to warn staff only. The sounder is set to a high volume range for general use.
Synchronisation of tones ensures the integrity of the alarm signal/tones from different sounders do not merge into one signal that could be mistaken for a different tone.
For systems requiring isolators at every point, the built-in isolator saves installation time and cost.
The built-in acoustic self-test enables the sounder to listen to itself when it is switched on and if no sound is detected, a fault signal will be transmitted when the sounder is polled to the control panel. The sounder base can be used either with a detector fitted or with a cap for operation as a stand-alone alarm device.
- Two volume ranges
- Alert and Evacuate tones
- Synchronisation of tones
- Individual and group addressing
- Built-in short circuit isolator
- Unique acoustic self-test
Approvals: AS ISO 7240.3:2014
