The ACP-07 Waterproof Conventional Emergency Alarm Initiating Device is a re-settable manual call point with unique and innovative features. It has been designed to obtain maximum visibility, high reliability in operation, and incorporates a pleasant aesthetic appearance.
Six modes of operation are achievable simply by choosing the appropriate internal connection terminals. All these configurations are easily accessed via the screw terminals. The internal printed circuit board is fully enclosed and protected and incorporates a current limiter that maintains a steady supply to the LED.
The ACP-07 Waterproof Conventional Emergency Alarm Initiating Device is easily reset using the special key provided that allows a simple twist action to restore the call point to its normal operating condition. The same key is used to access the electrical connection.
| Mounting | Surface Mount |
| Maximum Voltage | 30 Volt |
| Minimum Voltage* | 4.5 Volt if LED with R1 is chosen 6.0 Volt if LED with R2 is chosen |
| Current Rating (Non-Operated) | 0 mA |
| Current Rating (operated): Resister Values R1 470Ω R2 680Ω |
18 mA @12 Volt - R1 13 mA @12 Volt - R2 45 mA @24 Volt - R1 31 mA @24 Volt - R2 |
| Cable Termination | 0.5-2.5 mm² |
| Operating Temperature | -30/+70°C |
| Humidity | 0-95% |
| IP Rating | 67 |
| Material | ABS / P Glass Fibre |
* Below minimum voltage LED Current is lower than 7 mA
| 4105-1038 | White Waterproof Evacuate Conventional MCP |
